JD A-arms +1 Max Clearance! - Page 2

bigsexy · 03-10-2009, 06:48 PM

Quote:

Originally Posted by craig macphee

how wide are you with those +1's?

+1

BleedBlue700R · 03-10-2009, 10:26 PM

around 48" maybe 49" it's hard to tell measuring myself

rep99099 · 03-10-2009, 11:23 PM

2" wider then stock!

measure your bike and add 2"

BleedBlue700R · 03-11-2009, 06:37 AM

Quote:

Originally Posted by rep99099

2" wider then stock!

measure your bike and add 2"

I'm not sure what you're trying to say (since I thought 46" was stock and I said 48"), but curious I measured again before work. It's 48" I'm sure around 49" while I'm racing. Leaving work at 10 this morning to head out to our Indoor MX for a work out before this weekends race we'll see how she handles.

rep99099 · 03-11-2009, 09:51 AM

sorry that was meant for the guy that asked you....

being as if your measuring outside of tire to tire, tires/rims are different offsets, etc...unless you pick a common point and measure from like hub to hub.

simple as can be, if he measured his bike and add 2", +1 on each side, thats how wide his bike will be with +1 arms!

shawnz · 05-06-2009, 03:21 PM

Are those re-worked YFZ shocks?

So these are MGC STD Travel +1 - very nice!

BleedBlue700R · 05-07-2009, 02:02 PM

Yes fully revalved and built for my weight and riding style by GT Thunder. Just got them done again for this season since I blew a seal on one of the front ones.

03-10-2009, 10:26 PM	#12 (permalink)
BleedBlue700R Sponsor - All Out Throttle Join Date: Aug 2008 Posts: 672	around 48" maybe 49" it's hard to tell measuring myself __________________ Raptor 700R: 15t renthal, tether, ITP GNCC's and rims, AOT graphics kit, Pro-Armor rad. guard and rear skid plate, AC bumper, TAG +1 Stem, TAG T2 bars, GT THUNDER suspension, Blingstar Nerfs, Full HMF exhaust, PC5, Pro Flow Intake, Wiseco 11:1 kit, JD Performance A-arms +1 Max clearance and PRM grab bar Sponsored by: All Out Throttle ATV Brakes N More GT Thunder SteelMX HMF 661 TAG Instigator Racing Osiris Shoes

03-10-2009, 11:23 PM	#13 (permalink)
rep99099 Modding the Motor Join Date: Jun 2008 Location: Foresthill, CA Posts: 794	2" wider then stock! measure your bike and add 2" __________________ 08 Raptor 700 SE II It's got a few mods here and there... High Desert Dyno Holeshot Designs Joker's Vault Quads and Customs Tech Quad Shop

03-11-2009, 09:51 AM	#15 (permalink)
rep99099 Modding the Motor Join Date: Jun 2008 Location: Foresthill, CA Posts: 794	sorry that was meant for the guy that asked you.... being as if your measuring outside of tire to tire, tires/rims are different offsets, etc...unless you pick a common point and measure from like hub to hub. simple as can be, if he measured his bike and add 2", +1 on each side, thats how wide his bike will be with +1 arms! __________________ 08 Raptor 700 SE II It's got a few mods here and there... High Desert Dyno Holeshot Designs Joker's Vault Quads and Customs Tech Quad Shop

05-06-2009, 03:21 PM	#16 (permalink)
shawnz Modding the Motor Join Date: May 2008 Location: Phoenix, AZ Posts: 827	Are those re-worked YFZ shocks? So these are MGC STD Travel +1 - very nice! __________________ '07 Raptor 700R GYTR Edition - GYTR Frame Skid / Pro Armor A-Arm & Swing Arm Skids / 22/23 Razr2s / 13T / CCP stabilizer / Pro Taper SE bars / PCIII / HC2 / 22x11x10 7 Pdl Skat Trak Extremes / STU Razor Back fronts / Simple Racing HID conversion / ProDesign Intake (foam filter) / Phoenix Spark Arrestor / no lid - HDD tune

05-07-2009, 02:02 PM	#17 (permalink)
BleedBlue700R Sponsor - All Out Throttle Join Date: Aug 2008 Posts: 672	Yes fully revalved and built for my weight and riding style by GT Thunder. Just got them done again for this season since I blew a seal on one of the front ones. __________________ Raptor 700R: 15t renthal, tether, ITP GNCC's and rims, AOT graphics kit, Pro-Armor rad. guard and rear skid plate, AC bumper, TAG +1 Stem, TAG T2 bars, GT THUNDER suspension, Blingstar Nerfs, Full HMF exhaust, PC5, Pro Flow Intake, Wiseco 11:1 kit, JD Performance A-arms +1 Max clearance and PRM grab bar Sponsored by: All Out Throttle ATV Brakes N More GT Thunder SteelMX HMF 661 TAG Instigator Racing Osiris Shoes

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.moddedraptor.com/community/jd-performance/5089-jd-arms-1-max-clearance.html
Posted By	For	Type	Date
New Jd Performance Std Shock Mgc Arms - YFZCentral	This thread	Refback	05-07-2009 07:02 PM
New Jd Performance Std Shock Mgc Arms - YFZCentral	This thread	Refback	04-25-2009 01:52 AM
New Jd Performance Std Shock Mgc Arms - YFZCentral	This thread	Refback	03-11-2009 01:57 AM
New Jd Performance Std Shock Mgc Arms - YFZCentral	This thread	Refback	03-05-2009 06:22 PM
New Jd Performance Std Shock Mgc Arms - YFZCentral	This thread	Refback	03-05-2009 05:52 PM
New Jd Performance Std Shock Mgc Arms - YFZCentral	This thread	Refback	03-05-2009 03:20 PM
Burgard Xc A-arms? - YFZCentral	This thread	Refback	03-05-2009 01:04 PM
New Jd Performance Std Shock Mgc Arms - YFZCentral	This thread	Refback	03-05-2009 01:04 PM