Fuel pump wint turn on, or try to start
Close
Login to Your Account
ModdedRaptor.com - Yamaha Raptor Forum
Results 1 to 3 of 3

Thread: Fuel pump wint turn on, or try to start

  1. #1
    Stock, ready to MOD MarineRaptor's Avatar
    Member #
    16225
    Join Date
    Dec 2017
    Posts
    1

    Fuel pump wint turn on, or try to start

    Hey so i recently just installed a pcv and fuel customs intake on 2018 raptor put it all back together and went to start it and when i turn the key i dont hear the fuel priming and it wont even try to turn over, the green N displays on the dash and the pcv has a green light for power and the status light blinks red, i have triple checked all the connections, kinda lost on this so if you have any ideas that would be great

  2. #2
    Administrator/Owner
    Supporting Member
    Wreckless's Avatar
    Member #
    2
    Join Date
    May 2008
    Location
    Michigan
    Posts
    5,634
    There are two plugs that are very similar and can be swapped on the PCV. Go look again and check all your plugs. I think you have them swapped.

    Coop we miss you brother..

  3. #3
    Stock, ready to MOD Comptonk's Avatar
    Member #
    15898
    Join Date
    Sep 2017
    Posts
    17
    Quote Originally Posted by Wreckless View Post
    There are two plugs that are very similar and can be swapped on the PCV. Go look again and check all your plugs. I think you have them swapped.
    Also make sure all your connections are clean from oil, dirt and dust . I was topping up coolant one day and a some spilt down into my key/starter connection, and the bike wouldn't start or prime , i was stumped for a few hours haha

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •