Search Results for ‘mods’

I have seen one Web Site say all you need is HD springs with a WebCam2. Others says you need to buy modified rocker arms? Who has experience with these, reliability, performance, quality? Is there another cam out that has improved upon the Hot Cam 3 and only need HD springs? What's out there?

Raptor 660 parts Most of the parts I have are brand new I decided to build up a different project just before I finished up with the raptor. I have a pair of brand new tcs long travel triple rate reservoir race shocks $1000 Extended stainless front brake lines $20 Green powder coated fender...

Hey guys, new to the forum here. Looking for some help on adjusting my ejk fuel controller on my 14 raptor. Can't seem to get it adjusted right, seems to be flatlining on high rpms, and not the power it should have ( I think ). The mods are 11:1 wiesco piston, stage 3 hot cams, full exhaust (...

Hey guys, new to the forum here, looking for some ideas/info. I have a 2014 raptor 700, intake ,exhaust, fuel programmer , and a cdi fs ignition. I'm looking for more power, I was looking into big bore kits, cranks and cams, can I run a 734 big bore kit on pump gas, with crank and cams? Or is...

Short time lurker, first time poster. I'll just say I've been away from motor-sports for quite a few years now. So I've been reading in here and researching the www as much as I can. Perhaps someone can help one in need of some advice as to the pecking order I am about to embark in? I'm a...

i have a 2008 yamaha raptor 700 and i am adding a 734mm bore with 11:1 compression and im also adding a hot rods crank and stainless valves and i was wondering if i have these upgrades will i need to upgrade the cam to

Hi guyz i just brought my 2008 raptor 700r 2 months ago and it came with "dual LT exhaust" and i endup putting pro intake and pc5 with stage 2 cam!! i made 52.22hp with 43.69tq is that right number with the mods i have done?? just confuse please help thanks!!!

Hey I got a 2008 raptor and joined this forum it already has full HMF pipe. The plastics and decals are not in the best shape. I want to make the raptor look as badass as it sounds and drives. I need some help in getting new decals and exterior mods. It has the red aftermarket "feet holders" and...

Guys I have a stock air filter and box whole assembly cause I purchased a fci and I also have stock exhaust with phoenix insert new in box.pipe and intake have 112 hours on it.came off a 2009 raptor 700 se.I am looking for a arms shocks and axle.maybe trade or buy and sale?also have tires for...

Guys just wanting some opinions they sent me the wrong size I got theese for a trail bike they fit tho.I got 20x11 razor in rear,22x7 ambush in the front.will theese do good?

This is my first quad and I have a nbit of ltr experience and 2000 miles on my new Rappy.I ride trails and I'm trying to Lear how to stunt!I can ride wheelies with one foot on the grab bar pretty well,I do doughnuts alot,and hit 10 to 15 foot jumps.I am looking for mod advice and riding advice...

Hey bros I'm getting a fci with box power commander five and Barnett dirt digger clutch kit and I need a pipe.I ride trails woods and hill climbs.money will be a factor but I want insane speed and power.thanks for the help guys!!

my raptor 350 does go fast and im satisfied with the stock features but i want it to be more snappy and pop up more. i dont have any idea so for those of you who are all decked out please tell me how i can make it pop up and wheelie or be snappy thank you please help

RPM Dominator II Axle 700raptor Excelent condition SOLD PLEASE DELETE I have this posted on a couple sites, so the best way to get a hold of me is email. It should be listed in my profile, but if its not, PM me and ill send it. (Phone number too) My Ebay account is Vze2hrpm, with 100%...

hello i need your help i have a raptor 700r 2009 and i put on a yoshimura full exhaust a dynojet programmer and k&n air filter, what can i add if i wish have more power on my stock engine raptor?? i'm searching for the hot cams stage 1 but i dont know if this stuff help me to have more power in...

Just bought a new 08 raptor with pro armor nerfs, tires and rims(don't know the make but they look sweet) and a cheapo fmf slip on. After doin a lot of surfin on this forum I decided to spend another 5 grand and go all out. I called tqs and found the prices are some of the better out there. Ill...

Ok so Im new to the forum and I have a question that has probably asked a million times. I have put a new K&N air filter and intake on my 08 Raptor 700 and am looking for a new exhaust system. I want to know what is the best between DMC, Barker and Looney Tunes as far as duals go. I am going to...

This thread has been deleted