Modded Raptors Forum banner


  1. made 52.22hp and 43.69tq ?? is that right for the mods i have done!!

    Raptor 700 General
    Hi guyz i just brought my 2008 raptor 700r 2 months ago and it came with "dual LT exhaust" and i endup putting pro intake and pc5 with stage 2 cam!! i made 52.22hp with 43.69tq is that right number with the mods i have done?? just confuse please help thanks!!!
  2. Need PC3 map please!! (and have some to offer too)

    Raptor 700 Mods
    I hate making posts like this, but I need your guys' help. I'm needing a map for my PCIII. Mods are: DMC afterburner duals Modquad intake/no lid/k&n +3 TB 11.5:1 piston HC2 PC3 Dynatek programable ign. If anyone has anything that would get me close, PLEASE help a brotha out. For my side of...

    Wanted Parts and Bikes
    I need a pc3 or pc5 for one of my machines before i can ride it again. If you have one please send me pics and how much shipped to 73160. Thank you.
  4. Installed PCV with Autotune...Any ideas?

    Raptor 700 Mods
    Hi guys, I installed everything lastnight and when hooked up to the laptop, It reads RPM's, but NO Air/Fuel Ratio...Anyone experience this? Also, I ran it 3 times for 15-20 minutes each and seen only one change. Does anyone have or know of a right up about this software and tips with using...
  5. Barker duals questions

    Raptor 700 Mods
    It took me and my buddy about 8 hours but we ripped my bike apart and installed some new mods on it. However after installing barker duals, trinity intake, and a k&n filter I am wondering if all is well. I had some pretty normal problems like mixing up the fuel injector plugs when installing...
  6. My Autotune Learning’s by Maxwellsteel

    Raptor 700 Mods
    I don’t know what I did the first time around but this time everything worked out great! I rode five times at five minute intervals pretty much the same way each time. Each time I came back to plug into the computer, the trims adjustments were getting less and less. I accepted the trims and when...