Modded Raptors Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
697 Posts
If your referring to a car style wheel bearing instead of ball bearings you need a different carrier. I could never find bearings the right size for the stock one.

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
 

·
Registered
Joined
·
697 Posts
the factory bearings are sealed, if they aren't lasting any more than 4 months you have some other issues such as too tight a chain, axle bent or swingarm crocked in the chassis.
The seals around the axle keep the dirt away from them, they need to be in good shape as well.
I agree. The spacer between the bearings could be damaged also. If it were me I would get a double row carrier and put Boss Bearing double wide angular contact bearings in it. They are ball bearings that give you some side load capability like a tapered roller.

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top