Modded Raptors Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
So I bought a 2005 raptor 660 it had no compression and the one way bearing was shot so did the top end and the one way bearing did the stator too because it didn’t look good and also did the cdi Recifecator and the coil because it was sitting outside for a year in the rain and everything else and once it came to the start up it would just turn over wouldn’t even try to start so checked it it was getting gas it was pulled the spark plug and checked if it had spark and it would only spark once I let off the start button so tryed a new spark plug and still the same thing checked over all the wires and there is no rubbed or cut wires also when I let off the starter button it won’t spark every time maybe 1 time out or 10 so kinda lost don’t really know what to do from here first time I ever had to deal with loss of spark so don’t really know what to do any help will be appreciated
 
1 - 1 of 1 Posts
Top