Modded Raptors Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter #1
HR plus 5 crank.
Polished with purple /polished head. I'm going to do r1 conversion so I am parting this out. I also just took a video of it starting and running this morning, this thing is a beast out at Saint Anthony Sandune's I just have always wanted to do an R1 conversion so I'm going to sell the motor. any questions let me know.
Head was redone by Cuervo here is a list of what was done to it.
Head is ported
Valves OEM
Pivot shafts
Seals
tappet screws
Rockers
Hotcams 3
thermostat
Valve job and resurface, cleaning and assemblie with shims

$500 for the head

New 5mm stroker crank with Welded pin $250
Plus all other parts are available also.



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
6 Posts
HR plus 5 crank.
Polished with purple /polished head. I'm going to do r1 conversion so I am parting this out. I also just took a video of it starting and running this morning, this thing is a beast out at Saint Anthony Sandune's I just have always wanted to do an R1 conversion so I'm going to sell the motor. any questions let me know.
Head was redone by Cuervo here is a list of what was done to it.
Head is ported
Valves OEM
Pivot shafts
Seals
tappet screws
Rockers
Hotcams 3
thermostat
Valve job and resurface, cleaning and assemblie with shims

$500 for the head

New 5mm stroker crank with Welded pin $250
Plus all other parts are available also.



Sent from my iPhone using Tapatalk
Do you have the throttle body need a little plastic piece off it

Sent from my SAMSUNG-SM-G930A using Tapatalk
 

·
Registered
Joined
·
6 Posts
I believe the tb is a +2 and I would want $200 for it. I also have a fuel customs intake and filter if interested.


Sent from my iPhone using Tapatalk
You don't want to sell just that plastic piece off it or do you have a old tb that you would sell


Sent from my SAMSUNG-SM-G930A using Tapatalk
 
1 - 8 of 8 Posts
Top