Modded Raptors Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
1,284 Posts
Is the HC stage II cam good for tight trail riding or is it too much?
I have that cam in mine and it rips in the upper rpms. It should be fine for trails. Its always nice to have the power when you need it.
But its sucks when you need it and its not there.
 

·
Registered
Joined
·
2,177 Posts
i feel the hc2 is a good trail cam. a stage 1 really inst worth the install imo. the hc2 does not take 2 much off the bottom end.
 

·
Registered
Joined
·
24 Posts
I really did not notice any loss of low end power with the install. But I also installed an 11:1 piston at the same time, which probably offset the cam install.
 

·
Registered
Joined
·
1,145 Posts
I was gonna say I'll let you know, getting one installed as we speak. The guy at the bike shop says he's done a couple & it "livens" them up quite a bit. I just have the other Big 3 besides the cam, no 15T. IMO i'd say the 15T would hurt you more on tight triails, I didn't like it on the trails, found myself doing the 2 to 3 shift a lot.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top