Modded Raptors Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi guys/gals,

I have a 2002 Raptor 660, had tear motor down due to valves. Put it back together, checked valve clearance, timing, valve leaks, new battery, carb, starter, solenoid, new spark plug and fresh gas. Starts and idles but cuts out and bogs at 1/2 to 3/4 throttle. Wouldn’t even go in reverse with new carb. Switched out to old carb that I cleaned and it would go in reverse but still cutting out and bogging.
prior to all the new parts it was cutting out and had to be pull started but once running it would just shut off shortly after riding it.
Going crazy and I have a race this weekend, already missed races due to to and my ltr450 acting up the same
 
1 - 1 of 1 Posts
Top