Modded Raptors Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
941 Posts
Discussion Starter · #1 ·
it had like 3 gears with broken teeth, pieces flew into the rob scratching it and a little piece got stuck between the rings and sleeve and made a little scratch. so $350 later i have new gears, valve springs because the exhaust valves werent sealing good:mad1: and complete head gasket. we took the head to get it p&p, the cylinder got honed, and we are installing an 11:1 wiseco piston, possibly a stage 2 cam:rockon:
 

·
Registered
Joined
·
112 Posts
well i am glad to see you made it better since you had to get in there anyways. Stock is just to ......well stock.:beerchug:
 

·
Registered
Joined
·
23 Posts
so what all breaks on raptor 660 often? obviously the starter bendix,trannys??!!mine needs a timing chain and also needs piston and rings at least rings...losing compression
 

·
Registered
Joined
·
652 Posts
while you have the cases apart, make sure you change out the strainer thing in the bottom of the cases. the oil runs though it before it goes into the pump. it was under $15 bucks if i remember correctly. mine was rather plugged up with i checked it.

also check the plastic gears, if you havent already...
 

·
Registered
Joined
·
652 Posts
lol....sorry, i dont look at dates
 
1 - 8 of 8 Posts
Top