Modded Raptors Forum banner

Newbee here with a quick question.

1K views 4 replies 2 participants last post by  troyzstang 
#1 ·
Let me start this post by saying this is not a joke or time to slaughter the new guy.:thumb:

I have had several 660s & 700 Raptors but my heart is true to My Banshee.
What I was wanting to ask is this.
Can I make my basically stock 700r keep up with my banshee on the track without draining the pocketbook?

Here's my Banshee. Please reply with ideas.
** Once again I am not looking for a spitting match; just advice.

Thanks
Troy


 
See less See more
3
#3 ·
Did you want to share advice or just be that same old "Joe" with a smartass remark.

I ran against my other bike ( 06 700R ) Wasn't pretty.
I am looking to run both bikes. My 700 will not run with the competition in it's current state. Please advise or stfu.
 
#4 ·
I wasn't trying to be smart, if your Banshee is truly what the dyno sheet reads (which I doubt, it should be a good bit more than that, clearly) then You should be able to get Big 3, a cam, and a stock bore piston and hang with the Banshee decent.

Barkers, FCI Intake, a MSD or new PCV controller, HC3 cam and a CP Tech 11.5:1 piston should be a great combo, and you should hit 55-60 HP...


Sorry it came across wrong...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top