Modded Raptors Forum banner

Status
Not open for further replies.
1 - 20 of 68 Posts

·
Super Moderator
Joined
·
5,647 Posts


September ROTM Nominations

In this thread you will post your pictures to nominate yourself or your friend for the September Raptor of the month. From now until 8/15 please post up your best pictures in one post to be judged at the end. When you post up please post the forum ID of the person you are nominating, a mod list and as many of the best pictures you have of that persons Raptor. Included in those pictures I suggest you post a majority of non action pics so we can get a good look at the bike.

On 8/16 a panel of diverse judges will take a good look at all the nominations and break it down to just two bikes for the final vote. The final vote will be decided by the members via a new thread with a poll. The final voting thread will run from 8/16 until 8/31 and the winner will be crowned on 9/1. The winner will be the feature bike for the month of September, and will also receive a free moddedraptor T-shirt.

Please keep the text only posts to a minimum . If you need to add more pictures please edit your first post, do not post multiple times or it will get confusing.

Rules:
1. Anyone can enter once a month, no matter if you nominate yourself or someone nominates you.
2. You can only win once a year. Once you win in a calender year, you can not be nominated or win in that same calender year.

Members who can not be nominated:

Delriva - August ROTM
 

·
Registered
Joined
·
2,177 Posts
care to tell the hp?
 

·
Registered
Joined
·
562 Posts
care to tell the hp?
88 h.p. 70#s t.q. the dyno room was 115 degs we are changing the head to +2 valves and we did not open the intake up for my 52mm t.b. so that should be good for a few h.p. when we get that done :thumb:
 

·
Registered
Joined
·
158 Posts
Nice! Jdog gets my vote so far. :banana:
 

·
Registered
Joined
·
2,177 Posts
88 h.p. 70#s t.q. the dyno room was 115 degs we are changing the head to +2 valves and we did not open the intake up for my 52mm t.b. so that should be good for a few h.p. when we get that done :thumb:
badass! cant wait to see it run.
 

·
Registered
Joined
·
9 Posts
my 02 660

this is my 02 660
+2 a arms,yfz 450 shocks,686 kit,pro flow intake,staige 2 hot cam,shearer in frame drag pipe,modquad +4 swing arm,modquad rear grab bar,skat trak ultra lights with smoothies up front and + 2 modquad stearing stem
 

·
Registered
Joined
·
2,853 Posts














barker duals
trinity intake with outerwear
protec lid
pc3
turner bars
black asv shortie levers
razor tires
douglas beadlocks (and a full set of ITP beadlocks not pictured)
t.m. designs case saver
B&N custom paint (hood and tank topper and headlights)
black pro amor fat peg nerfs. (not pictured)
parking brake removed
pro design teather
rock chassis skid ( that suck ass don't buy them)
rock swinger skid ( that sucks ass also)
a few custom stickers on under side of fender for a few more ponies..
key moved to left fender
pro amor front bumper
shock covers for extra horse power also
 

·
dA jOkA's gone WiLd!
Joined
·
702 Posts
OK.....I'll play.....
07 700 Stock Bore/Stroke 70HP 59.63 TQ at 6000 feet adjusted altitude.
SLC Quad custom arched +12 swinger
Lock up clutch
Alba computer system ign/fuel
Custom graphics with matching seat cover
13 Extreme paddles
Marvin Shaws
Factory cut plastics
Sloex bars
Flamed billet covers
Alba race carbon fiber
Vinco one off in frame drag pipe
Fireball axel
+2 arms
Lots of chrome (helps lets the sand fall off) :lol:
90 pounds shaved
Pro Armor levers
Does 55 mph up Sand MT. LS Utah with a 210 lb rider. (fixin to go faster:banana:)








 

·
Registered
Joined
·
2,486 Posts
Damn those things are sick !!!
 

·
R.I.P. Coop
Joined
·
2,192 Posts
Joka, informed me as to where I attain a thumb throttle like you have?

Like the design as well as the extended, length!!!
 

·
Registered
Joined
·
2,177 Posts
good looking street rappy
 
1 - 20 of 68 Posts
Status
Not open for further replies.
Top