Modded Raptors Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
Ok so long story short i bought the bike already upgraded i didnt know what was in there what wasent othe than what i had rebuilt myself stroker crank piston etc , but even removing my cam and installing new intake vavles i didnt notice , but now i notice while dealing with a different issue ,

There is a hotcam installed , which one i dont know? The only hint i have other than pulling it out again and measuring it .

But it says
HOTCAMS 773

I would like to know so i could run the most optimal valve clearance ,
 

·
Registered
Joined
·
468 Posts
If you really wanted to know, which I would. I would call hotcams and ask. 773 is neither the part number for any of their cams. But the valve lash is the same for both stage 2 and 3 cams at .10 mm and .18 mm for intake/exhaust.
 
1 - 2 of 2 Posts
Top